Albright Metals Limited 191B Carr Place Leederville, WA 6007 Phone: +61 8 9321 0001 Email: info@albrightmetals.com ASX: ABR ABN: 59 616 795 245 A S X A N N O U N C E M E N T 25 JUNE 2026 Gold and Antimony Mineralisation Confirmed and Extended HIGHLIGHTS  Results received for Albright Brook Prospect drilling, with best down hole width gold intercepts of: o AB-26-01 – 37.05m at 1.12 g/t Au from 60.95m including: 2.35m at 4.76 g/t Au from 77.10m and including: 0.70m at 28.80 g/t Au from 85.55m o AB-26-02 – 13.20m at 1.14 g/t Au from 62.30m including: 1.55m at 2.19 g/t Au from 63.70m and including: 1.30m at 3.70 g/t Au from 69.60m o AB-26-02 – 1.88m at 2.28 g/t Au from 100.62m including: 1.38m at 3.01 g/t Au from 101.12m o AB-26-02 – 8.25m at 0.68 g/t Au from 151.82m including: 1.10m at 1.36 g/t Au from 152.20m and including: 1.74m at 1.13 g/t Au from 154.94m  Significant antimony mineralisation uncovered, including high-grade antimony intersected in hole AB-26-02, internal to a larger gold interval (noted above) with downhole intercept of: o AB-26-02 – 2.46m at 0.50% Sb and 1.72 g/t Au from 62.3m including: 0.36m at 3.23% Sb and 2.81 g/t Au from 64.4m  Bond Road drilling has intersected zones of elevated gold, base metals and antimony,  Follow up drill program targeting discovery of high-grade antimony mineralisation at Bond Road Prospect and extensional drilling of the gold and antimony system at Albright Brook Prospect is planned. Albright Metals Limited (“Albright Metals” or “the Company”) provides assay results from diamond core samples from antimony and gold exploration drilling at the Golden Pike Project. Results reported are from two holes drilled at Albright Brook Prospect for 269.4m and five holes drilled at Bond Road Prospect for 778m between January and March 2026. Assays have also been received for additional Vail Road core sampling. CEO, Greg Hill comments, “These exciting gold and antimony results from the Albright Brook Prospect highlight the scale and prospectivity of the broader mineralised system within the Golden Pike Project. Importantly, the antimony we are encountering is giving us valuable insight as we plan our targeting for the ASX: ABR | albrightmetals.com 2 next phase of drilling commencing later this year. The prospect of a larger gold and antimony system on the project, in addition to the high-grade Vail Road deposit, is particularly encouraging.” Results from the first exploration drilling program at the Golden Pike Project have returned broad gold intercepts and further evidence of antimony mineralisation at the Albright Brook Prospect. At Bond Road, several intercepts of low-level gold, sulphide mineralisation and antimony anomalism, coupled with zones of strong sericite alteration, continue to indicate proximity to a potential antimony-gold system. Albright Metals’ focus is now on reviewing and ranking all targets for gold and antimony across the entirety of the Golden Pike Project and planning follow up exploration at Albright Brook and Bond Road Prospects. Figure 1 shows the location of the Golden Pike Project and the antimony and gold prospects. Figure 1: Golden Pike Project Location and Prospects ASX: ABR | albrightmetals.com 3 Albright Brook Prospect Results The 2026 exploration drilling campaign at the Albright Brook Prospect was designed to intercept the previously identified gold and antimony mineralisation in one diamond drillhole completed by Rockport in 2008 and several of the five holes drilled by Globex in 2016.1 Figure 2 shows all drilling to date at the Albright Brook Prospect, with significant intercepts for gold and antimony plotted on the drill traces. Regional scale mapping published by the Government of New Brunswick is shown in the background of the image. Figure 2: Collar Plan Albright Brook Prospect 1 ASX announcement 16 July 2025 ‘Due Diligence Highlights Antimony at Golden Pike’ ASX: ABR | albrightmetals.com 4 Albright Metals’ recent drill hole AB-26-01 was drilled towards the east (090⁰ azimuth) as a twin hole to the Globex hole DPA-16-01. The twin hole has now returned a broad intercept of gold mineralisation, with a down hole intercept width of 37.05m at 1.12 g/t Au from 60.95m and higher internal grades, including 2.35m at 4.76 g/t Au from 77.10m and 0.70m at 28.80 g/t Au from 85.55m. The gold mineralisation is within the Cameron Road Granite in a strong sericite (potassic) alteration system, with intense quartz-carbonate veining and pyrite – arsenopyrite. The granite host is highly fractured with thin zones of brecciation and shearing. The second hole completed, AB-26-02, is a scissor hole towards the southwest (245⁰ azimuth). Hole AB-26-02 has returned further down hole gold intercepts of 13.20m at 1.14 g/t Au from 62.30m, including 1.55m at 2.19 g/t Au from 63.70m and 1.30m at 3.70 g/t Au from 69.60m. Within the gold intercept there is also an antimony intercept of 2.46m at 0.50% Sb and 1.72 g/t Au from 62.3m, including a high-grade stibnite vein internal to a quartz vein that is 0.36m at 3.23% Sb and 2.81 g/t Au from 64.4m. The deportment of the stibnite within the quartz vein is very similar to the antimony occurrence first noted at the prospect by Globex in hole DPA-16-01.2 Over the broader 2.46m interval, the stibnite is hosted as patchy sulphide development within the Cameron Road Granite. The interpreted trend of the gold mineralisation, towards the northeast, is a strong target for extensional drilling, with the intersection of the gold trend with the northwest trending wrench fault to the north a favourable setting for mineralisation. The gold-antimony mineralisation trend at Albright Brook is shown on Figure 2 as a dashed yellow line. The gold mineralisation in holes DP-08-36, DPA-16-013 and 2026 Albright Metals drilling sits within the Cameron Road Granite, close to the southern contact with the Carpenter Brook Formation sediments. Beneath the main zone of mineralisation are additional gold intercepts, away from the Cameron Road Granite contact zone in hole AB-26-02. Further work is required to determine the gold orientation and extent of the deeper intercepts. Figure 3 is a cross section of the preliminary interpretation of the thickest down hole gold intercepts, with current and previous intercepts labelled. The high-grade antimony occurrences are shown as bar graphs in magenta next to the hole traces of DPA-16-01 and AB- 26-02. The location of the section is denoted as A – A’ on Figure 2. Hole collar details, and a full table of intercepts from Albright Metals’ 2026 drilling are included in Appendix 1. Collar details and existing intercepts from Rockport and Globex drilling at Albright Brook Prospect are also provided. 2 ASX announcement 7 October 2025 ‘Highest Grade Antimony Rock Chip Samples Received to Date’ 3 ASX announcement 16 July 2025 ‘Due Diligence Highlights Antimony Potential at Golden Pike Project’ ASX: ABR | albrightmetals.com 5 Figure 3: Cross Section – Albright Brook Prospect Bond Road Prospect Results Five diamond core holes drilled at Bond Road Prospect were designed to test beneath significant antimony–arsenic–gold soil anomalism and high-grade stibnite (antimony) boulder samples. The drilling also tested towards the west and northwest from the established drill positions, targeting a possible wide structural corridor, with the western edge interpreted along a northwest trending topographic low. Figure 4 shows the Bond Road Prospect drilling, with the antimony soil anomaly and the high-grade boulder sample locations. A zone of potassic alteration with elevated gold is shown on the image in BR-26-01, with a down-hole intercept of 3.0m @ 0.13 g/t Au from 195.8m. This interval has elevated arsenic of 0.28% As. Arsenic and potassic alteration halos indicate proximity to structures to vector towards gold and/or antimony mineralisation. Highly anomalous antimony values of 700ppm Sb each were intersected in hole BR-26-01 over 0.42m from 110.0m down hole, and in hole BR-26-02 over 0.60m from 174.50m depth. Hole BR-26-02 has 600ppm Sb over 0.35m from 17.85m down hole. All depths are down hole widths, with more information required to determine orientation and thickness of the structures associated with the anomalies. Studies of the comprehensive drill dataset collected will continue. ASX: ABR | albrightmetals.com 6 Geology units intersected in the drilling are dominantly the Carpenter Brook Formation sediments, with interbedded siltstones, shales and purple sandstone in the most northern holes. Thin rhyolite units and an intermediate intrusive occur in holes BR-26-02 and BR-26-05, in addition to siltstones and shale units. Future works are planned to test north-northwest of the soil anomaly where significant thicknesses of rhyolite are interpreted in the Government of New Brunswick regional mapping.4 Geological context for the Bond Road surface and drilling anomalies with Albright Metals’ interpretation of the orientation of gold mineralisation at the Albright Brook Prospect to the north is outlined in Figure 4. The gold trend potentially aligns with a northeast trending weak antimony soil anomaly, in an orientation that could be a conjugate fault set to the regional thrust and wrench faults. Anomalous metals are present in some intervals in the Bond Road Prospect drilling, including gold, silver, antimony, copper, lead or zinc, or a combination thereof. The results are below economic grade but indicate potential structural conduits and elevated metal endowment of the lithologies. Collar details for the Bond Road Prospect drilling and anomalous assay results are provided in Appendix 2. 4 Branscombe, L, Charnley, B., and Thorne, K. 2018. Antimony. New Brunswick Department of Energy and Resource Development, Energy and Mines Division, Mineral Commodity Profile No. 12, 7 p https://www2.gnb.ca/content/dam/gnb/Departments/en/pdf/Minerals-Minerales/mcp_12-e.pdf ASX: ABR | albrightmetals.com 7 Figure 4: Bond Road Drill Anomalies with Surface Sampling Vail Road Gold Deposit Additional Sampling Results Drilling by Albright Metals during 2025 at Vail Road Gold Deposit was designed to:  Infill portions of the Parallel Zone to test continuity.  Replicate some historical holes as quality assurance for a pending mineral resource estimation to be reported under the JORC code. ASX: ABR | albrightmetals.com 8  Infill the shallowest portions of the Main Zone in preparation for future works mine planning.  Drill oriented drill core to collect structural data on the vein contacts and any confining structures.  Acquire sufficient core sample for metallurgical recovery and processing test work. Further sampling of core drilled during 2025 has added two more down hole intercepts which are: o VR-25-74 – 1.52m at 1.38 g/t Au from 61.38m Including 0.4m at 4.54 g/t from 62m o VR-25-82 – 2.48m at 2.92 g/t Au from 23.02m Including 0.8m at 8.13 g/t Au from 24.25m*5 The additional sampling for VR-25-82 has changed the previously reported intercept that was 2.03m at 3.35 g/t Au from 23.02m, including 0.8m at 8.13 g/t Au from 24.25m.6 All collar details and other material assays have been released previously for the Vail Road Gold Deposit. Further sampling at Vail Road has closed off open gold intercepts and ensured no mineralisation was missed during the initial round of sampling. The decision to complete further sampling was made after update of the geological model. One further batch of samples is still being processed at the laboratory. Next steps The Company plans to conduct further exploration drilling at the Albright Brook and Bond Road Prospects following full interpretation of the drill results and additional prospecting. Target ranking of other known gold and antimony prospects at the Golden Pike Project will also be completed in coming months for additional exploration. For further information, please contact: Greg Hill Chief Executive Officer +61 8 9321 0001 albrightmetals.com This announcement has been produced in accordance with the Company's published continuous disclosure policy and has been approved by the Board. 5 Updated gold intercept with addition of new Vail Road Gold sample results 6 ASX announcement 11 March 2026 ‘Vail Road High-Grade Gold Results at Golden Pike Project’ ASX: ABR | albrightmetals.com 9 ABOUT ALBRIGHT METALS Albright Metals’ current projects are located in Canada and Western Australia, both Tier One mining and exploration jurisdictions. Albright Metals has executed an agreement with Globex Mining Enterprises Inc. (GMX-TSX, GLBXF-OTCQX, G1MN-FSE) to acquire the Golden Pike Gold and Antimony Project in New Brunswick, Canada.7 The project covers approximately 3,292ha of contiguous mining claims which includes the Vail Road high-grade gold deposit classified under NI 43-101,8 and the exploration-stage Bond Road antimony prospect. The Golden Pike Project is in an area that is close to road, rail, port and grid power infrastructure. Southern New Brunswick is on the Canadian east coast, adjacent to Maine, USA. It enjoys a mild maritime climate, allowing year round exploration activities. The province has a mature mining services industry and has historically produced antimony and gold from multiple mines. Albright Metals has a substantial $7M manganese joint venture on licences in the Bryah Basin with ASX listed OM Holdings Limited (ASX: OMH), with OMH having already spent over $4.5 million to earn-in to the Manganese Rights of the project. Albright Metals holds a suite of mineral rights, including copper, nickel and gold, over the Gabanintha project, near Meekatharra,9 which has a JORC 2012 Mineral Resource for Cu, Ni, Co and additional structural gold potential. COMPLIANCE STATEMENTS The information in this announcement that relates to exploration results is based on information compiled by Ms Gemma Lee, who is a Member of the Australian Institute of Geoscientists (AIG) and is Principal Geologist for Albright Metals Limited. Ms Lee has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which she is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Ms Lee consents to the inclusion in this announcement of the matters based on her information in the form and context in which it appears. Where the Company refers to Exploration Results in this announcement (referencing previous releases made to the ASX), the Company is not aware of any new information or data that materially affects the information included in the relevant market announcements. 7 ASX announcement 11 July 2025 ‘Option Exercised to Acquire High-Grade Canadian Gold Project’ 8 ASX announcement 21 May 2025 ‘Acquisition of Advanced High-Grade Gold Project’ 9 ASX announcement 25 May 2022 ’36 Million Tonne Nickel-Copper-Cobalt Mineral Resource at Gabanintha’ ASX: ABR | albrightmetals.com 10 FORWARD LOOKING STATEMENTS This announcement may contain certain “forward-looking statements” which may not have been based solely on historical facts, but rather may be based on the Company’s current expectations about future events and results. Where the Company expresses or implies an expectation or belief as to future events or results, such expectation or belief is expressed in good faith and believed to have a reasonable basis. However, forward looking statements are subject to risks, uncertainties, assumptions and other factors which could cause actual results to differ materially from future results expressed, projected or implied by such forward-looking statements. Readers should not place undue reliance on forward looking information. The Company does not undertake any obligation to release publicly any revisions to any “forward looking statement” to reflect events or circumstances after the date of this report, or to reflect the occurrence of unanticipated events, except as may be required under applicable securities laws. ASX: ABR | albrightmetals.com 11 APPENDIX 1: Collar Table – Albright Brook Prospect – Golden Pike Project Co-ordinate System: NAD83 Zone 20 All holes drilled as NQ diameter diamond core. Hole ID Depth (m) East North RL Dip Azi Year and Company AB-26-01 101.4 269,816.1 5,063,096.4 138 - 45 90 2026 Albright Metals AB-26-02 168 269,899.6 5,063,089.6 134 - 50 245 2026 Albright Metals DPA-16-01 121 269810 5063100 142 - 45 90 2016 Globex DPA-16-02 97.5 269848 5062967 147 - 45 290 2016 Globex DPA-16-03 47 269854 5062961 147 - 45 90 2016 Globex DPA-16-04 81 269802 5063176 142 - 45 85 2016 Globex DPA-16-05 106 269777 5063306 143 - 45 285 2016 Globex DP-08-36 119 269857 5063042 180 - 45 0 2008 Rockport Albright Metals 2026 Significant Gold Intercepts – Albright Brook Prospect – Golden Pike Project Calculated at 0.2 g/t Au cut-off for a minimum intercept grade of 0.5 g/t Au with no more than 4m of internal waste and no more than 1m of consecutive waste. Hole ID From (m) To (m) Interval (m) Au g/t Gram Metre Year AB-26-01 26.90 27.35 0.45 1.85 0.83 2026 AB-26-01 30.10 32.40 2.30 0.57 1.30 2026 AB-26-01 35.40 35.70 0.30 1.23 0.37 2026 AB-26-01 43.70 44.00 0.30 0.76 0.23 2026 AB-26-01 48.00 48.60 0.60 1.51 0.91 2026 AB-26-01 60.95 98.00 37.05 1.12 41.50 2026 including 77.10 79.45 2.35 2.03 4.76 2026 and including 85.55 86.25 0.70 28.80 20.16 2026 AB-26-02 62.30 75.50 13.20 1.14 15.05 2026 including 63.70 65.25 1.55 2.19 3.40 2026 and including 69.60 70.90 1.30 3.70 4.80 2026 AB-26-02 86.67 87.30 0.63 0.73 0.46 2026 AB-26-02 96.70 97.28 0.58 1.5 0.87 2026 AB-26-02 100.62 102.50 1.88 2.28 4.29 2026 including 101.12 102.50 1.38 3.01 4.15 2026 AB-26-02 124.05 124.92 0.87 2.96 2.58 2026 AB-26-02 151.82 160.07 8.25 0.68 5.62 2026 ASX: ABR | albrightmetals.com 12 Albright Metals 2026 Significant Antimony Intercept Within Gold Intercept – Albright Brook Prospect – Golden Pike Project Calculated at 0.1 % Sb cut-off for a minimum intercept grade of 0.5 % Sb within a continuous gold intercept with no more than 3m of internal waste. Hole ID From (m) To (m) Interval (m) Sb % Au g/t Year AB-26-02 62.30 64.76 2.46 0.50 1.72 2026 including 64.40 64.76 0.36 3.23 2.81 2026 Sb intercept within broader gold mineralised zone Globex and Rockport Significant Gold Intercepts – Albright Brook Prospect – Golden Pike Project – Previously Reported Calculated at 0.2 g/t Au cut-off for a minimum intercept grade of 0.5 g/t Au with no more than 5m of internal waste and no more than 2m of consecutive waste. Hole ID From (m) To (m) Interval (m) Au g/t Gram Metre Year DPA-16-01 25.85 30.10 4.25 0.36 1.51 2016 DPA-16-01 62.75 84.00 21.25 0.59 12.52 2016 DPA-16-01 88.50 108.50 20.00 1.17 23.45 2016 DPA-16-03 15.10 19.00 3.90 0.44 1.70 2016 DPA-16-04 36.40 38.40 2.00 0.62 1.24 2016 DP-08-36 43.48 65.00 21.52 0.56 12.11 2008 Globex and Rockport Significant Antimony Intercepts – Albright Brook Prospect – Golden Pike Project Calculated at 0.1 % Sb cut-off for a minimum intercept grade of 0.5 % Sb within a continuous gold intercept with no more than 3m of internal waste or at no less than 1.0 % Sb outside a continuous gold intercept Hole ID From (m) To (m) Interval (m) Sb % Au g/t Year DPA-16-01 76.50 77.00 0.50 12.50 0.10 2016 DPA-16-03 17.70 18.00 0.30 4.74 2.38 2016 ASX: ABR | albrightmetals.com 13 APPENDIX 2: Collar Table – Bond Road Prospect – Golden Pike Project Co-ordinate System: NAD83 Zone 20 All holes drilled as NQ diameter diamond core. Hole ID Depth (m) East North RL Dip Azimuth Year and Company BR-26-01 101.4 269,367.0 5,062,011.0 133 -50 25 2026 Albright Metals BR-26-02 168 269,595.2 5,061,972.3 140 -50 310 2026 Albright Metals BR-26-03 121 269,418.1 5,061,965.7 134 -45 235 2026 Albright Metals BR-26-04 97.5 269,356.0 5,062,005.2 133 -45 300 2026 Albright Metals BR-26-05 47 269,595.1 5,061,969.3 140 -60 320 2026 Albright Metals Albright Metals 2026 - Anomalous Intervals – Bond Road Prospect – Golden Pike Project Reported at any length greater than 0.1 g/t Au, 1 g/t Ag, 400 ppm Sb, 0.1% Cu, Pb, Zn with cut-offs individually or combination thereof. Hole ID From (m) To (m) Int. (m) Anomaly Au g/t Ag g/t Sb ppm Pb % Cu % Zn % As ppm BR-26-01 12.1 12.4 0.3 Ag, Pb, Zn 0.003 5.38 20.5 0.21 0.04 0.65 17 BR-26-01 67.0 67.33 0.33 Ag, Cu, Zn 0.003 1.88 279 0.07 0.10 0.72 135 BR-26-01 87.1 87.5 0.4 Ag 0.003 2.48 62.9 0.03 0.01 0.03 92 BR-26-01 95.9 96.2 0.3 Ag, Pb, Zn 0.005 2.54 14.5 0.48 0.03 0.84 58 BR-26-01 110.0 110.42 0.42 Sb 0.003 0.84 700 0.00 0.31 0.02 261 BR-26-01 111.17 111.47 0.3 Ag, Pb, Cu 0.003 3.48 367 0.24 1.01 0.02 266 BR-26-01 187.45 189.0 1.55 Ag, Pb, Zn 0.003 1.30 145.7 0.14 0.01 0.40 41 BR-26-01 195.8 198.8 3 Au 0.134 0.23 75.9 0.00 0.00 0.01 2,782 BR-26-02 17.3 18.2 0.9 Sb, Ag 0.017 1.68 442.3 0.00 0.06 0.01 102 Including 17.85 18.2 0.35 Sb, Ag 0.016 2.07 600 0.00 0.07 0.01 107 BR-26-02 23.3 23.66 0.36 Au 0.122 0.17 73.3 0.00 0.00 0.01 22,400 BR-26-02 160.84 161.34 0.5 Zn 0.017 0.22 71.2 0.00 0.04 0.64 74.8 BR-26-02 174.5 175.1 0.6 Sb, Ag, Cu 0.003 1.02 700 0.02 0.10 0.004 189 BR-26-02 204.3 204.63 0.33 Ag, Pb, Zn 0.015 1.26 220 0.25 0.02 0.39 147 BR-26-02 206.46 206.78 0.32 Ag 0.013 1.8 88.8 0.11 0.01 0.06 83.8 ASX: ABR | albrightmetals.com 14 APPENDIX 3: JORC Code, 2012 Edition – Table 1 Exploration Results Section 1 Sampling Techniques and Data Criteria JORC Code explanation Commentary Sampling techniques  Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.  Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.  Aspects of the determination of mineralisation that are Material to the Public Report.  In cases where ‘industry standard’ work has been done this would be relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases, more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information.  Sample results in this release are for NQ diameter core samples submitted as cut half core samples.  Gold results were determined by 30gram Fire Assay with Atomic Absorption Spectrometry (AAS) finish, with over detection limit (5 g/t Au) resolved by Gravimetric Fire Assay.  Multi-element results are determined from 4 acid digest with ICP-OES / MS for 48 element suite. Over- detection Sb and As resolved with Sodium Peroxide fusion Assay with ICP-OES finish.  Down hole intercepts are reported with true widths not calculated, due to structural data analysis being in progress at the time of writing.  Coarse-crush splits were taken every 15th sample and the second split also analysed by the lab to evaluate the representivity of lab splitting for the initial batch; this work is pending for this second batch of results.  Sample weights ranged between 800 grams and 2.5 kg, with sample length ranges of 0.3 – 1.1m submitted for assay. Drilling techniques  Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc)  Drilling results for this release are NQ diamond core results. NQ diameter produces 47.6mm diameter core. ASX: ABR | albrightmetals.com 15 Criteria JORC Code explanation Commentary and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).  Recovery was good, averaging 94.3% over all holes with standard tube drilling. Good recovery is due to lack of weathering profile and competent geology.  Core was oriented using an H ACTIII tool. Orientation line continuity was deemed good through large portions of the drilling where multiple orientation marks aligned through competent core with less than 10 degrees deviation between marks. Drill sample recovery  Method of recording and assessing core and chip sample recoveries and results assessed.  Measures taken to maximise sample recovery and ensure representative nature of the samples.  Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.  Drill core was accurately metre marked and recovery recorded for every run (standard runs at 3m lengths being 2x 1.5m rods).  RQD was measured for the core with values averaging 72%.  Field duplicates (second quarter core) samples were not submitted. In lieu a second coarse crush split was taken every 15th sample to evaluate lab splitting. Results show high repeatability.  There is no relationship evident between sample recovery and grade. Logging  Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.  Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography.  All drilled metres (with exception of casing that was rock rolled – typically top 3.5m) was logged for lithology, veining, mineralisation, alteration and structure, representing greater than 95% of total hole depths logged.  Being early stage exploration drilling, detailed geotechnical logging was not completed, but RQD was. ASX: ABR | albrightmetals.com 16 Criteria JORC Code explanation Commentary  The total length and percentage of the relevant intersections logged.  Logging is both qualitative and quantitative in nature.  All core is photographed.  Core is logged to a level of detail to support Mineral Resource estimation, mining studies and metallurgical studies. Sub-sampling techniques and sample preparation  If core, whether cut or sawn and whether quarter, half or all core taken.  If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.  For all sample types, the nature, quality and appropriateness of the sample preparation technique.  Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.  Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling.  Whether sample sizes are appropriate to the grain size of the material being sampled.  Core samples are half core samples from NQ diameter core. Half core is retained in archive at the Sussex Core Facility.  Quality control procedures were performed at the laboratory to ensure sub- sampling techniques during sample preparation are representative, including client requested second coarse- crush splits every 15th sample.  Sample preparation employed by the lab includes drying, weighing (weights reported), coarse crush, split, pulverise then sub-sampling the pulp for fire assay. The lab completed in-house coarse- crush and pulp repeats to ensure sample representivity. Albright Metals included blank samples in the submission to test for grade smearing during sample preparation with no issues detected.  No field duplicates were submitted during the program to test ground variability, however twins of historical holes were included in the drill plan to test ground variability and repeatability of drill results.  Sample sizes are considered representative to the grain size of the material being sampled. ASX: ABR | albrightmetals.com 17 Criteria JORC Code explanation Commentary Quality of assay data and laboratory tests  The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.  For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.  Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.  All sample analyses for the 2026 drill core samples were conducted by Activation Laboratories Ltd. (Actlabs), Ontario, a certified commercial lab, following sample preparation at the New Brunswick, Fredericton facility. Gold was analysed by Fire Assay with an Atomic Absorption finish (FA-AA), with a maximum detection limit of 5 g/t Au. Samples that were over detection limit were also assayed with Fire Assay with Gravimetric finish to resolve the grade above the detection limit of the FA-AAS method. Multi-element analysis on the was completed with a 4 Acid Digest with ICP AES or MS finish for a suite of 48 elements.  Albright Metals submitted standards (CRMs) at a frequency of one CRM per mineralised zone; blanks at a frequency of one blank per mineralised zone, and requested additional coarse- crush splits and analysis at a frequency of 1 per 15 samples. No issues with laboratory analytical accuracy (CRMs), smearing of gold across samples (blanks) or sub- splitting at the lab (second coarse crush splits) has been detected.  No umpire laboratory samples have been submitted to date. Verification of sampling and assaying  The verification of significant intersections by either independent or alternative company personnel.  The use of twinned holes.  Documentation of primary data, data entry procedures,  Significant intercepts by Rockport Mining Corporation (“Rockport”) in previous drill campaigns have been checked as pa